How to cut a straight line with a jigsaw

As an aspiring woodworker, the first and the main thing one needs to learn is cutting a straight line. A jigsaw is basically a motor-powered tool consisting of the responding saw blade and electrical motor.

“Bayonet saw” is a commercial name utilized by certain makers to prefer a jigsaw. If you need to make straight lines, I will show you the best way to use a jigsaw to cut a straight line perfectly when taking care of your projects.

The Following Is a Guide on How to Cut a Straight Line using Jigsaw:

When you want to achieve a straight cut utilizing a Best jigsaw. A decent exact line and a jigsaw with a sharp cutting blade to go through the line is all you need. Even though a jigsaw is an ideal choice for curved cuts it does cut the straight line exactly. Hence can be utilized to achieve both a curved cut as well as a straight line.

A jigsaw has a wide range of materials that it tends to be used to cut the straight line. Methods used to achieve straight line cuts utilizing a jigsaw somehow differs subject to the straight line one needs to cut.

Making split cuts, miter cuts, cross and slant cuts will be cuts that a jigsaw can make. When needing plunge cuts a jigsaw has the ability to start an exact straight line from the center point of the material.

Best Jigsaw Blades:

Different kinds of jigsaw blades are obviously there for a jigsaw depending on the few several materials and for specific cuts, angles, and such. Two things to consider when it is due to pick a blade while deprived to cut a straight line.

For specific events, one needs to choose a proper blade between the tear cut and crosscut blade. There is a chance one gets off scot-free with the combination of the cutting blades. They have a lot of choice on materials.

Drawing a Straight Line:

Rip cut and crosscuts should be possible by a jigsaw. Therefore, one might prefer utilizing an estimating tape other than a ruler. By doing so one can easily measure the length. And width at a go in opposition to utilizing a ruler in case the piece of wood is bigger.

A square can be helpful as well in line drawing along with the tape measure. Likewise, when pushing the jigsaw on the line the square can be a guide as well.

MakeShift Fence:

Including a guide on top of the material to cut is fundamental. Also, it can be utilized as a Makeshift fence since it performs the similar task as that of a fence in a table saw. There are various ways for the installation of this yet one way only works perfectly.

Clamps are utilized for attachment of the fence to the bit of wood. This empowers an person to exert enough pressure thus maintaining the guide in place minus any impact on the piece of wood. One may need to cut a few pieces of wood from below the fence.

Cutting the Wood:

All things considered, those have been done and the equipment amassed. The only remaining part currently in mastering the utilization of a jigsaw in achieving a straight line cut. The control of the saw in the right proportions of pressure applied in moving the saw ahead and downward.

It is easy to draw a decent straight line however there is the difference between paper and wood. Both won’t give you the similar result because in the case of the wood the pencil does not generally vibrate on the surface level but the jigsaw will.

Add a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.